1. Health and Safety Benefits

Those concerned about healthy air can breathe a little easier in buildings insulated with the water-blown products offered by Icynene. Dangers associated with certain forms of insulation, such as long-term VOC emissions, were not observed in Icynene, according to extensive testing.

In fact, Icynene products can actually help to improve indoor air quality. People with allergies, asthma and certain chemical sensitivities have often found that, in buildings with Icynene, dangers of respiratory distress caused by natural airborne irritants are reduced.

Pollutants and airborne allergens can penetrate even the smallest gaps in other forms of insulation. Airborne moisture can also infiltrate traditional insulation, sometimes leading to mold, which releases spores and potentially toxic substances called mycotoxins. Thanks to the superior air seal created by Icynene, dangers of inhaling these toxins and irritants are greatly reduced.

For all these reasons, Icynene is highly recommended for spaces occupied by people with allergies, asthma and other particular respiratory issues. In fact, Icynene was used to improve indoor air quality as part of the American Lung Association’s “Health House” program.

More Safety Benefits of Icynene Spray Foam Insulation:
Problems Addressed Before They Happen

Fire Safety
Rest assured that Icynene meets code requirements relating to fire safety. Icynene spray foam is a Class 1 material with a flame spread of less than or equal to 25.

Electrical Wiring
Independent third-party testing confirms that electrical wiring is not affected by Icynene. Dangers of overheating were not found to be a concern during testing.


2. Problems Avoided

As people become educated about the science of insulation, more and more are discovering both building performance and peace of mind on a whole new level — with Icynene. Problems that used to be commonplace, or even seem inevitable, can now be permanently avoided.

Help Prevent Energy Loss

Icynene doesn’t just insulate; it creates a superior air barrier compared to traditional insulation like fiberglass. When it’s sprayed into the wall cavity, it expands to fill the space, regardless of the size or shape. That includes cracks and crevices that other insulations couldn’t easily fill. It adheres to every surface it touches, creating a sealed environment. Thanks to the science of Icynene, problems like drafts can be a thing of the past, and energy bills can be reduced by up to 50%.

Help Prevent Mold

Because of the airtightness it delivers, Icynene spray foam insulation helps block airborne moisture from infiltrating the wall cavity. In cases of roof or plumbing leaks, after the leak has been fixed, Icynene’s light-density insulation will dry, reducing the potential for mold growth. Once dried, it continues to operate at peak performance levels. This is a significant and unique benefit offered by Icynene; problems related to moisture management are common among other types of insulation.

Help Prevent Air Quality Issues

By helping to reduce the risk of mold, Icynene also helps prevent the spores and toxins that get released into the air. In addition, airborne pollutants and allergens that can pass through the gaps left by other forms of insulation are much less of a threat as a result of the air-sealing capabilities of Icynene. Problems associated with asthma and allergies can therefore often be alleviated by using Icynene.

Prevent the Cost of Replacement

Icynene insulation comes with an industry-leading warranty. That’s because with Icynene, problems that are common with other forms of insulation just don’t occur, since there is no change in the insulation’s properties or performance over the life of the building.

A Note of Caution:  Beware of Off-Brand Spray Foam Insulation Issues

Many people use the term “Icynene” as a synonym for “spray foam insulation,” but nowadays there are other brands of spray foam insulation on the market besides Icynene. Problems like lack of adhesion have occasionally occurred when customers have used an imitation product that was falsely represented as an Icynene product.

Protect yourself from off-brand spray foam insulation issues by being certain that what you get is indeed an authentic Icynene product, installed by a trained and licensed Icynene contractor. To find an Icynene licensed dealer/contractor near you, use our convenient contractor locator.


3. Problems Solved

Energy efficiency is only one of the many benefits offered by Icynene insulation. Problems with allergies? Lack of privacy? You may be surprised how much Icynene could help.

Allergies & Asthma Relief

Because it dramatically reduces air filtration, Icynene helps prevent airborne allergens and pollutants from entering the building.

In addition, because of its moisture management benefits, Icynene also helps protect against the formation of mold. That means that with Icynene insulation, problems related to mold spores or other toxins released by mold are also reduced.

Noise Reduction

Just as Icynene seals against the transfer of air and accompanying moisture, it also helps reduce the transfer of noise. Thanks to the sound-dampening qualities of Icynene insulation, problems and annoyances related to “thin walls” can be easily turned into greater privacy.

Another Perk of Icynene Spray Foam: Problems with Other Building Systems Are Easily Addressed

When you have Icynene insulation, problems of some kinds may be simpler to solve than if other insulation were used. For example, in the case of a plumbing or electrical issue, Icynene products can be easily cut or removed to access the source of the problem. If a plumbing leak were to get the product wet, leaving the wall cavity open temporarily would allow it to dry and eliminate the need for total replacement.


4. Installation Problems - How to Avoid Them Icynene

Make Sure it’s Really Icynene Being Installed

Icynene® spray foam insulation is manufactured to ISO 9001 quality standards and extensively tested. Avoid imitators – other products may not be manufactured to the same high quality and may not perform in the same way as real Icynene materials.

Icynene spray foam insulation can only be installed by licensed Icynene contractors. These contractors are chosen for their dedication to quality, and they should be able to answer any questions you have about the installation. Ask your contractor for proof that they are an Icynene licensed contractor – they should be able to produce a certificate for you. If in doubt, use our Find a Contractor tool on the left hand side of every page to see if the contractor is listed – if they’re not, they’re not an Icynene licensed contractor and you may have non-Icynene installation problems.

Selecting the Right Insulation Type

Your Icynene licensed contractor will advise on the best type of spray foam insulation to use for your property – open cell or closed cell. Different insulation types may be suitable in different applications.

Installation Preparation

Before starting installation, your Icynene licensed contractor will plan the installation

  • Which other trades need to be finished before spray foam can be installed
  • Protection of surfaces and advice on what needs to be protected
  • Barriers around the area to be sprayed
  • Access platforms if required
  • Temporary ventilation
  • Signage
  • Bringing equipment to the building
  • Routes for hoses
  • Waste disposal

This planning will ensure that the area can be sprayed efficiently and effectively and avoid problems during installation.

Application of Icynene Spray Foam Insulation

Before applying Icynene spray foam insulation, your Icynene licensed contractor will follow these steps:

  • Wear the required personal protective equipment
  • Mix the materials following Icynene guidelines
  • Ensure the temporary ventilation is working
  • Take into account the temperature (especially if extremely hot or cold) and other conditions
  • Ensure the substrate is ready to be sprayed on, and “flash” some substrates with a thin layer of foam in very cold weather
  • Spray in the agreed areas and remove waste product
  • Check that the insulation has been properly installed
  • Leave the sprayed area sealed for 24 hours with the ventilation working
  • Open up the area, remove the ventilation, and allow access

This allows for safe spraying of Icynene spray foam – when you use Icynene, installation problems are avoided because the Icynene licensed contractors pay attention to the details.

Comprehensive Warranty

When your installation is complete, your Icynene licensed contractor will give you all the information you need to claim your warranty. In the rare event that there is an installation problem, your Icynene contractor will make it right in accordance with the terms of the warranty.


5. Mold Problems – How to avoid them

Check That You’re Installing Real Icynene – Mold Problems Avoided

Icynene ® open cell spray foam insulation has less than 5% water absorption, and Icynene closed cell spray foam insulation rejects bulk water even when immersed. Some other manufacturers and some contractors may pass off over spray foams as “Icynene” or “like Icynene” – but if it’s not the real thing it may perform differently and cause mold problems.

What If I Have A Water Leak?

With any type of Icynene spray foam, when there is a water leak, the water runs straight through the insulation, making it easier to find the source of the leak. If the water becomes completely trapped and is standing in the same place for a long time, be assured that Icynene materials are not a source of food for mold – but remember that the adjacent materials may become wet and moldy from the water. For that reason, whenever you have a water leak, you should repair the source of the leak, and remove any materials that are stopping the water running through or drying out. Do this immediately to avoid mold, and let the Icynene spray foam dry out. With Icynene, mold formation shouldn’t be an issue if you follow these common-sense suggestions.

Reduce the Risk of Mold from Humid Air and Condensation

Icynene spray foams act as air barriers. If you live in a humid climate, or have rooms with high humidity, the moisture in the air may spread through the building and condensate. This water can then lead to mold. When you protect against the movement of moist air using the air barrier formed by Icynene, mold and condensation risks are reduced.

Allergies & Asthma Relief with Icynene – Mold, Allergens and Pollutants Blocked

Some allergies and asthma may be triggered by mold, so using Icynene materials can help you have a healthy home for the above reasons. Also, because it dramatically reduces air filtration, Icynene also helps prevent airborne allergens and pollutants from entering the building.